WARN ZEON XC 10-S Portable Winch Kit | Part 112650
Couldn't load pickup availability
- Fully secure checkout
- Trusted by thousands
- 0% Financing Available*
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
WARN ZEON XC 10-S Multi-Mount Portable Winch Kit – 10,000 lb Capacity with Synthetic Rope
Part Number: 112650 | Brand: WARN Industries
Serious Recovery Power. Portable Versatility. Ready Wherever Adventure Takes You.
Experience the freedom of flexible vehicle recovery with the WARN ZEON XC 10-S Multi-Mount Portable Winch Kit. Engineered for off-road enthusiasts who demand maximum versatility, this complete portable recovery system combines 10,000 lbs of rated single-line pulling capacity with lightweight synthetic rope, rugged construction, and convenient receiver-mounted portability.
Unlike traditional permanently mounted winches, the WARN Multi-Mount system allows you to install your winch at the front or rear of a properly equipped vehicle using a compatible 2-inch receiver hitch. When the recovery is complete, simply disconnect the system, remove the winch carrier, and store it until your next adventure.
At the heart of the kit is the premium WARN ZEON XC 10-S Winch, featuring a high-performance 12V series-wound motor, heavy-duty three-stage planetary geartrain, automatic load-holding cone brake, and advanced IP68/IP69K waterproof protection.
Equipped with 100 feet of 3/8-inch WARN Spydura synthetic rope, an aluminum hawse fairlead, and a remote control, the ZEON XC 10-S delivers dependable recovery performance while offering the handling advantages of lightweight synthetic winch line.
The rugged Multi-Mount carrier is constructed from 3/16-inch steel with a durable gloss-black powder-coated finish. Built-in carrying handles make transporting and positioning the winch easier, while integrated stabilizing feet help keep the carrier steady when placed on the ground.
Designed with a compact, low-profile configuration, the ZEON XC 10-S Multi-Mount Kit allows the tailgate to be lowered on many pickup trucks without contacting the winch, depending on vehicle and receiver positioning.
Complete with mounting hardware, a hitch pin, and Multi-Mount-specific wiring with quick connectors, this portable winch kit offers a versatile recovery solution for properly equipped Jeeps, 4x4 trucks, SUVs, and overlanding vehicles.
Whether you're navigating remote trails, recovering a stuck vehicle, or preparing your 4x4 for unexpected challenges, the WARN ZEON XC 10-S Multi-Mount Portable Winch Kit delivers premium recovery performance with the flexibility to take your winch where you need it.
Key Features & Benefits
-
10,000 lb Rated Pulling Capacity: Dependable single-line recovery power for properly equipped Jeeps, trucks, SUVs, and off-road vehicles.
-
Portable Front or Rear Winch Mounting: Multi-Mount design allows the winch to be used with compatible receiver mounting systems at either end of the vehicle.
-
2-Inch Receiver Hitch Compatibility: Heavy-duty carrier is designed for properly rated 2-inch receiver hitch systems.
-
100 Feet of Spydura Synthetic Rope: Lightweight, easy-to-handle 3/8-inch synthetic rope provides excellent versatility for demanding vehicle recovery applications.
-
Premium ZEON XC 10-S Winch: Combines high-performance WARN engineering with a compact, low-profile design.
-
IP68/IP69K Waterproof Protection: Advanced sealing helps protect critical winch components against water, mud, dust, and harsh off-road conditions.
-
High-Performance Series-Wound Motor: Powerful 12V electric motor delivers dependable pulling performance.
-
Heavy-Duty Three-Stage Planetary Geartrain: Rugged planetary gearing delivers controlled pulling power and efficient operation.
-
Automatic Cone Brake: Integrated braking system provides dependable load-holding performance during winching operations.
-
Remote Winch Control: Included remote allows operation from a suitable position away from the winch and recovery line.
-
Heavy-Duty 3/16-Inch Steel Carrier: Rugged mounting platform provides strength and durability for portable recovery applications.
-
Gloss-Black Powder-Coated Finish: Durable coating helps protect the carrier against corrosion and environmental exposure.
-
Built-In Carrying Handles: Integrated handles make the portable winch carrier easier to transport and position.
-
Integrated Stabilizing Feet: Help prevent the carrier from rocking when placed on the ground.
-
Low-Profile Design: Compact ZEON XC winch configuration allows tailgate clearance on many pickup truck applications.
-
Quick-Connect Electrical Wiring: Multi-Mount-specific wiring and connectors simplify connecting and disconnecting the winch.
-
Aluminum Hawse Fairlead: Provides smooth rope guidance for the synthetic winch line.
-
Removable & Stowable: Easily remove the system when not in use rather than keeping a winch permanently mounted on the vehicle.
-
Premium WARN Construction: ZEON XC winch designed, engineered, and assembled in the USA.
Vehicle Compatibility & Fitment
Fitment Type: Universal Portable Mount — Compatible 2-Inch Receiver Hitch and Electrical Connections Required
The WARN ZEON XC 10-S Multi-Mount Portable Winch Kit is designed for use with compatible 12V vehicles equipped with an appropriately rated 2-inch receiver hitch system and suitable electrical connections.
Common Vehicle Applications
The following vehicle families are potential installation platforms when equipped with compatible receiver mounting systems and when the 10,000 lb winch capacity meets the vehicle's recovery requirements.
Jeep
-
Jeep Wrangler TJ
-
Jeep Wrangler JK / JKU
-
Jeep Wrangler JL / JLU
-
Jeep Gladiator JT
-
Other compatible Jeep 4x4 builds
Toyota
-
Toyota Tacoma
-
Toyota 4Runner
-
Toyota Tundra
-
Toyota Land Cruiser
-
Toyota FJ Cruiser
Ford
-
Ford Bronco
-
Ford Ranger
-
Ford F-150
-
Ford Super Duty F-250 and F-350, where capacity permits
Chevrolet
-
Chevrolet Colorado
-
Chevrolet Silverado 1500
-
Chevrolet Silverado 2500HD and 3500HD, where capacity permits
GMC
-
GMC Canyon
-
GMC Sierra 1500
-
GMC Sierra 2500HD and 3500HD, where capacity permits
Ram
-
Ram 1500
-
Ram 2500
-
Ram 3500, where capacity permits
Nissan
-
Nissan Frontier
-
Nissan Titan
-
Nissan Xterra
-
Nissan Armada
Other Applications
-
Custom-built 4x4 trail vehicles
-
Overlanding and expedition vehicles
-
Off-road trucks and SUVs
-
Recovery support vehicles
-
Other compatible 12V vehicles equipped with properly rated 2-inch receiver hitch mounting systems
Important Fitment Note: The vehicle models listed above are potential applications, not manufacturer-confirmed direct-fit combinations. Compatibility depends on receiver hitch dimensions, structural capacity, electrical connections, available clearance, and vehicle recovery requirements.
Front and rear mounting are possible only when the vehicle has a compatible, properly rated receiver and electrical connection at the intended mounting location.
Portable Mounting & Installation Requirements
-
Compatible 2-inch receiver hitch required
-
Receiver hitch and its attachment to the vehicle must be suitable for the intended winching loads and pull directions
-
12V DC vehicle electrical system required
-
Correctly installed, properly sized quick-connect winch power wiring required
-
Confirm suitable electrical connections at each desired winch mounting location
-
Verify sufficient clearance around the receiver, bumper, winch carrier, fairlead, and electrical connections
-
Confirm rear tailgate or hatch clearance before installation
-
Verify vehicle recovery capacity based on loaded vehicle weight and anticipated recovery conditions
-
Follow WARN's Multi-Mount installation instructions and operating procedures
Important: A standard 2-inch towing receiver does not automatically guarantee that the receiver or its vehicle attachment is rated for winching loads. Confirm the receiver manufacturer's specifications and WARN's installation requirements before use.
This is a portable receiver-mounted winch system, not a direct bolt-on replacement for every vehicle listed. Additional receiver mounting or electrical installation components may be required depending on the vehicle.
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | WARN Industries |
| Product Name | ZEON XC 10-S Multi-Mount Portable Winch Kit |
| Manufacturer Part Number | 112650 |
| Product Type | Portable Electric Vehicle Recovery Winch Kit |
| Winch Model | ZEON XC 10-S |
| Rated Line Pull | 10,000 lb (4,536 kg) |
| Line Pull Rating | Single-Line |
| Motor | 12V DC Series Wound |
| Geartrain | 3-Stage Planetary |
| Gear Ratio | 141:1 |
| Brake | Automatic Cone Brake |
| Free Spooling | Yes |
| Rope Material | WARN Spydura Synthetic Rope |
| Rope Diameter | 3/8" (9.5 mm) |
| Rope Length | 100 ft (30.5 m) |
| Fairlead | Hawse Fairlead |
| Remote Control | Included, Wired |
| Winch Power Operation | Power-In / Power-Out |
| Waterproof Rating | IP68 / IP69K |
| Winch Overall Length | 22" |
| Winch Maximum Height | 7.8" |
| Winch Maximum Width | 6.7" |
| Winch Mounting Bolt Pattern | 10.0" x 4.5" |
| Winch Mounting Holes | 4 |
| Carrier Mounting Type | 2-Inch Receiver Hitch |
| Carrier Construction | 3/16" Steel |
| Carrier Finish | Gloss-Black Powder Coat |
| Carrying Handles | Integrated |
| Stabilizing Feet | Integrated |
| Receiver Hitch Pin | Included |
| Electrical Connections | Multi-Mount Wiring with Quick Connectors |
| Electrical System | 12V DC |
| Portable Installation | Yes |
| Front Receiver Application | Yes, With Compatible Receiver |
| Rear Receiver Application | Yes, With Compatible Receiver |
| Control Pack | Low-Profile ZEON XC Configuration |
| Winch Engineering & Assembly | USA |
Specification Note: Winch dimensions, gear ratio, and motor specifications correspond to the ZEON XC 10-S winch incorporated into the kit. Installed dimensions and total kit weight differ because of the portable steel carrier. Verify available receiver clearance before purchase.
What's Included
-
(1) WARN ZEON XC 10-S 10,000 lb Electric Winch
-
(1) 100 ft x 3/8" WARN Spydura Synthetic Winch Rope
-
(1) Hawse Fairlead
-
(1) Wired Winch Remote Control
-
(1) Heavy-Duty Multi-Mount Steel Winch Carrier
-
(1) Receiver Hitch Pin
-
Multi-Mount-Specific Electrical Wiring with Quick Connectors
-
Required Kit Mounting Hardware
-
Manufacturer-Provided Installation and Operating Documentation
Note: The kit includes the portable winch carrier and the Multi-Mount wiring supplied by WARN. Vehicle-specific receiver installations, additional power connections for alternate mounting positions, recovery shackles, recovery straps, and other optional accessories are not included unless otherwise stated.
Portable Recovery Power for Serious Off-Road Adventures
When your adventures take you beyond the pavement, recovery flexibility can make all the difference. The WARN ZEON XC 10-S Multi-Mount Portable Winch Kit combines 10,000 lbs of pulling capacity, premium synthetic rope, advanced waterproof protection, and heavy-duty portable construction in a versatile recovery system built for challenging terrain.
Unlike permanently mounted recovery winches, the Multi-Mount design provides the flexibility to install the winch at the front or rear of a properly equipped vehicle. Its removable design makes it easy to stow the winch when recovery equipment is not needed.
From muddy forest roads and technical rock trails to remote overlanding routes, this WARN portable winch kit delivers the strength, convenience, and versatility needed to prepare for unexpected recovery situations.
Whether you're outfitting your Jeep, upgrading your 4x4 truck, or building a more versatile expedition vehicle, the WARN ZEON XC 10-S Multi-Mount Kit offers premium recovery power in a convenient portable package.
Explore farther. Recover from either end. Take WARN recovery power wherever adventure leads.
California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

$2,097.99
Questions about this product?
Don't be a stranger.
Selling fast!
Get yours while you can.